歡迎光臨濟南宏泰食品機械有限公司網站!

全國咨詢熱線
切片機的維修技巧
發布時間:2022-04-08 來源:http://www.avcrowdlimeera.com 發布人:admin

凍肉切片應用越來越廣泛,使用于火鍋店、等行業,更好的提高了切肉片的效率,帶來了很大的便利,但是使用時間長了難免會出現一些小問題,所以很有必要掌握一些切片機的維修技巧:
Frozen meat slicing is more and more widely used in hot pot shops, supermarkets and other industries, which better improves the efficiency of meat slicing and brings great convenience. However, some small problems will inevitably occur after a long time of use, so it is necessary to master some maintenance skills of slicer:
1、切片不均勻,無光澤,產生粉末較多。
1. The slices are uneven, dull and produce more powder.
(1)原因:刀片不鋒利;切片物料硬度太高;切片物料的粘汁將刀刃粘住;用力不均勻。
(1) Cause: the blade is not sharp; The hardness of slice material is too high; The sticky juice of slicing material sticks to the blade; Uneven force.


(2)維修方法:卸下刀片用磨石磨鋒利;將切片物料烘軟;卸下刀片將粘汁磨去;切片時用力均勻。
(2) Maintenance method: remove the blade and sharpen it with a grindstone; Bake the sliced material soft; Remove the blade and grind away the sticky juice; Slice evenly.
2、通電后凍肉切片機電機不運轉。
2. The frozen meat slicer motor does not operate after power on.
(1)原因:電源接觸不良或插頭松動;開關接觸不良。
(1) Cause: poor power contact or loose plug; The switch is in poor contact.
(2)維修方法:修電源或調換插頭;修理或更換同規格開關。
(2) Maintenance method: repair the power supply or replace the plug; Repair or replace the switch of the same specification.
3、工作時,電機停止轉動。
3. When working, the motor stops rotating.
(1)原因:凍肉切片機送料過多,將刀盤卡?。婚_關接觸不良。
(1) Cause: the frozen meat slicer is fed too much and the cutter head is stuck; The switch is in poor contact.
(2)維修方法:看下刀盤,取出卡住的物料;開關觸點調整或調換開關。
(2) Maintenance method: look at the cutter head and take out the stuck materials; Switch contact adjustment or exchange switch.
使用凍肉切片機的時候,要用手壓住設備的另一邊,否則會有物料跳動現象產生,切不到位,如果物料有點大時,可先將物料加工成符合入料口尺寸大小,再進行切片。
When using the frozen meat slicer, press the other side of the equipment by hand, otherwise the material will jump and cannot be cut in place. If the material is a little large, the material can be processed to meet the size of the feeding port before slicing.
以上就是為大家介紹的有關切絲切片機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://wwwchinafoodjxcom/
The above is the detailed introduction of the slicer. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://wwwchinafoodjxcom/

上一篇:果蔬氣泡清洗機的原理是什么?
下一篇:果蔬清洗機加工使用的一些常識

相關新聞